My LS/LQ4 developed a bottom end knock. I called SEVERAL machine shops in and around San antonio for machine work for the block and possibly heads (I hadn't torn it down so wasn't sure of the damage yet). I got quotes starting around 2.5k up to 9k for a STOCK REBUILD. E&E was the FIRST place to offer me a rebuild delivered to my front door, WITH WARRANTY. They told me straight up "yes, we can rebuild it, but for about the same price, you can have a rebuilt delivered to your door in a few days with a 3yr/100k mile no fault warranty ". I have a few more projects lined up and I'll definitely be using them for any machine work OR just get another rebuild with warranty.
A year ago they worked on my cylinder head from a Chrysler 3.5L V6 with a burnt exhaust valve. It was ready within 24hrs. They replaced 5 out of 12 valve guides. Resurface was well within specs. All for slightly less than $200. So far, head is performing well after one year.
R
Randy Contreras
Edited 5 years ago
Friendly knowledgeable staff over at E&E Machine. They did a great job on preparing my 7.4 454 big block. Now I need to order the parts to turn it into a 520CI Rat motor. O'boy it's gonna be big fun!!!
Kinda of a poor man, took me 9 months to pay for my rebuild and nobody judged me for $100 here $200 there during that time. They never called me for money either, I always let them know when I could or couldnt pay. I actually have this shop …
D
Danny Goldberg
8 years ago
I've taken 2 engines to E&E over 20 years and the service and work has been great each time. My first experience was in the late 90s when I was working on my first vehicle, a 1981 F150. I drove that car for 15 years and over 100,000 miles with no issue until I sold it. I recently bought a F350 work truck and needed the engine rebuilt. I live in Houston now, but given my experience as a teenager, I wanted the engine to go to E&E. I just picked up my 460 a few months ago and the engine is running great. The service and work was just like I remembered. Good and honest people to work with. I recommend them to anyone.
My 2008 Chevy Tahoe overheated and I needed to replace my engine. My brother-n-law had used E&E before and recommended we pull the engine and have it fixed. We took it to E&E, they rebuilt the engine, and my Tahoe has been running great ever since. The people were nice and the price was reasonable.
J
Jennifer Serrano
6 years ago
I was help by Pedro he did a fantastic job, has great customer service and the price was very reasonable. This business is a five star business. Highly recommended.
V
Valencia Thompson
8 years ago
I have been meaning for a while to leave a review for these guys, not only do they do quality work they have awesome customer service. It is a pleasure to get out of the office and pick up a part there. …
Very friendly folks who enjoy working on engines. These gentlemen resurfaced my Kubota tractor crankshaft after I ran it out of oil. I gave them the dimensions that were required to run oversized main bearings and they turned the damaged crankshaft down to within spec with the oversized bearings. I plastigauged the bearings after the work was done and they were all within the shop manual specified tolerances.. Thank you guys for the work and I'll be recommending this shop to others who need engine machining done!
C
chuck simmonds
Edited 7 years ago
You can"t go wrong with these guys,thanks Duffin for recommending them. Motors are clean as heck, I deal with c--- motor--- s----. motors, very dirty on the in side. I got lucky I didn"t start it and they give my money back ,O the head …
