Auto Part Store Category: JunkyardAuto Part Store Tags: 3060, auto parts, car parts, junk cars, Nashua, NH, and Recycling center
About Interstate Metal & Alloy in Nashua, NH
If you're looking to get rid of some old metal or electronics, then Interstate Metal & Alloy is your spot! Located right at 20 Simon Street in Nashua, NH 03060, this place has been a trusted name in the recycling business for a long time. It was founded and has been proudly owned by Brian Pender for over 30 years, meaning it likely started helping folks in the early 1990s. That’s a lot of metal recycled!
Unlike a typical wrecking yard or salvage yard that sells used car parts, Interstate Metal & Alloy focuses on buying and recycling various types of scrap metal. They’re super helpful for local businesses like plumbers, electricians, and machine shops who end up with a lot of metal scraps from their work. Think of them as the go-to spot to turn your metal trash into cash! If you're looking for other options, you can always check out more Salvage yards in New Hampshire.
Services Provided by Interstate Metal & Alloy
Interstate Metal & Alloy is a full-service scrap yard, but keep in mind their specialty: metal recycling! They're experts at handling all kinds of metal, especially nonferrous stuff like aluminum, brass, copper, stainless steel, and nickel alloy. They also take ferrous metals, which is basically your common steel and iron. They make it easy and safe with indoor drop-off spots, so you don't have to worry about the weather.
Here's a breakdown of what they offer:
- Scrap Metal Buying: They pay good money for your scrap metal. This is a big deal for plumbers, electricians, and machine shops. They offer prompt payment, often on the spot.
- Recycling of Computer E-waste: Got old computers or electronics? They'll take those too, helping keep harmful stuff out of landfills. This is a great way how junkyards help reduce waste.
- Commercial Pick-up Services: For their business customers, they even offer to pick up your scrap metal. Plus, they can provide containers like boxes, barrels, or skids to make collecting your scrap super easy.
Important Note: This business is not a traditional junkyard where you find used auto parts or buy whole used cars. Their focus is purely on buying and recycling scrap metals. So, if you're looking for an engine for your trusty old truck, this isn't the place. But if you've got a pile of old copper pipes, you're in luck!
Interstate Metal & Alloy Services at a Glance
Service Type Description Who Benefits Scrap Metal Buying Purchasing various metals like copper, aluminum, brass, stainless steel, nickel alloy, and steel. Plumbers, Electricians, HVAC Contractors, Machine Shops, Fabricators, General Public E-Waste Recycling Recycling of old computers and other electronic waste. Businesses, Individuals with old electronics Commercial Pick-up & Containers Providing pick-up services and containers (boxes, barrels, skids) for commercial clients. Commercial Accounts, Businesses generating large scrap volumes Indoor Drop-off Facility A clean, safe, and convenient indoor space for dropping off materials. All Customers Prompt Payment Quick and immediate payment terms for commercial clients. Businesses seeking fast payment for scrap Check Out This Video!
Video Placeholder: If you have a video about Interstate Metal & Alloy, please replace the empty “src” in the iframe above with the correct YouTube embed link!
Vehicle Types and Inventory
Just to be super clear: Interstate Metal & Alloy does not deal in vehicle sales or hold an inventory of cars or trucks for sale. They are not like a traditional auto salvage yard where you can browse for a used car or find parts for your vehicle. Their focus is strictly on buying and recycling metal. So, if you’re hoping to find a cheap used car or a specific late model vehicle, this isn't the destination for that treasure hunt.
Popular Auto Parts (Not Sold Here!)
Since Interstate Metal & Alloy is a scrap metal recycling facility and not a traditional wrecking yard or used auto parts store, they don't sell common auto parts. They're more about what’s inside those parts once they’re broken down into raw metal.
In a regular salvage yard, people often look for big ticket items to save money on repairs. These usually include:
- Engines and their buddies like cylinder heads or blocks.
- Transmissions, because sometimes shifting gears can be tricky, and replacing one can cost a fortune if new.
- Alternators and starters to get your vehicle cranking.
- Radiators and cooling system parts to keep your ride from overheating.
- Suspension parts like control arms, struts, or shocks to keep your ride smooth.
- Door assemblies, window regulators, and interior trim pieces.
- Fuel pumps and tanks.
- Exhaust components, especially pricey catalytic converters.
But remember, you won't find these as functional parts for sale at Interstate Metal & Alloy. They're all about the metal they're made from!
Most Recent Auto Parts Prices
Because Interstate Metal & Alloy is focused on scrap metal buying and not selling used auto parts, they don't have price lists for things like used engines, transmissions, or tires. Their pricing is all about the weight and type of metal you're selling to them.
If you want to know how much your scrap metal is worth or have questions about what they accept, your best bet is to reach out to them directly.
- Phone: (603) 883-0093
- Email: [email protected]
- Address: 20 Simon Street, Nashua, NH 03060
They're open Monday through Friday, 7:30 AM to 4:30 PM, so give them a call during those hours!
Service Area
People bringing their scrap metal to Interstate Metal & Alloy often come from all over the Nashua area and beyond. Besides Nashua itself, you'll find customers driving in from nearby New Hampshire towns like:
- Hudson
- Merrimack
- Litchfield
- Hollis
- Pelham
- Londonderry
- Windham
They even get folks from just across the state line, including places like Pepperell, Massachusetts. It’s a convenient spot for anyone needing to recycle metal!
Interchange System Information
If you're trying to figure out if a part from a 2005 Ford will fit your 2007 Chevy, you're looking for an auto parts interchange system. Unfortunately, Interstate Metal & Alloy does not offer this service.
Their business is all about buying and recycling raw scrap metal, not helping you find compatible parts between different vehicles. So, for those kinds of specialized questions, you'll need to check with a traditional used auto parts store or a different kind of salvage yard.
Warranty Information
Since Interstate Metal & Alloy doesn't sell used parts (like an engine or a transmission), there's no information about a used parts warranty, extended options, or costs. They buy scrap, they don't sell working car components.
If you're curious about their terms for the materials they buy or for any specific service, it's always best to contact them directly using the phone or email listed above.
Entry Fee and Discounts
Good news! There's no entry fee or cover charge to visit Interstate Metal & Alloy. You don't need to pay just to walk in the door and drop off your scrap metal or electronics. They're there to buy from you, not charge you to get in.
While they don't list specific “discounts” in the typical sense, they are known for offering competitive pricing for your scrap metal. This means you get a fair and often really good price for what you bring in. So, the discount is essentially getting good cash for your unwanted metal!
Tools and Equipment Needed to Pull Used Auto Parts (Not Here!)
Alright, let's clear something up right away: Interstate Metal & Alloy is NOT a “U-Pull-It” or self-service junkyard. You won't be grabbing your toolbox and heading in to yank an engine out of a wrecked car here. Their setup is for dropping off scrap metal and electronics, not for you to go digging for that elusive used car part.
However, for your general knowledge, if you were visiting a typical self-service salvage yard, here’s a peek at what you’d usually need to bring along:
- Basic hand tools: A good socket set, wrenches (both open-end and box-end), screwdrivers, pliers, and a trusty hammer.
- Specialty tools: Pry bars for stubborn parts, trim removal tools for interiors, and a breaker bar for those super tight bolts.
- Safety first! Always wear gloves, safety glasses, and sturdy boots. Don't forget, sometimes you need to drain fluids, so a catch pan is smart.
- For bigger jobs: If you're pulling a whole engine or transmission, you might need a heavy-duty jack, jack stands, and even an engine hoist. (But again, not at Interstate Metal & Alloy!)
Now, let’s talk about what Interstate Metal & Alloy does provide based on what they do:
- A clean, safe, indoor facility for you to drop off your scrap metal and e-waste. No muddy fields here!
- Prompt payment for the materials you bring. Get your money quickly!
- They handle the sorting and processing of metals like copper, brass, and aluminum.
Key Differences: Salvage Yard vs. Scrap Metal Buyer
Feature Traditional Salvage Yard (U-Pull-It) Interstate Metal & Alloy (Scrap Metal Buyer) Self-Service Part Removal Yes, you pull parts from vehicles yourself. No, they buy scrap metal and e-waste, not for self-service auto part removal. Tools Provided/Allowed Some provide tools, or you bring your own for removing parts. You don't need tools to remove parts here, as they don't offer that service. Accepts Whole Junk Cars Often yes, they buy and process whole vehicles. Not explicitly stated for whole cars; they focus on metal scrap and e-waste. Call to confirm for full vehicles. Accepts Scrap Metal/Electronics Sometimes (as part of vehicle recycling). Yes, specializes in it! Copper, aluminum, brass, e-waste, etc. Payment Offered For used parts you buy, or for vehicles you sell to them. For metals and electronics you drop off. Facility Type Outdoor lot with rows of vehicles for parts picking. Indoor drop-off facility, clean and safe. Cash for Junk Cars
While Interstate Metal & Alloy pays cash for scrap metal and electronics, they don't specifically advertise a “cash for junk cars” program for the general public. Their main gig is buying and recycling raw materials like copper, aluminum, and e-waste, especially from contractors.
This means if you have an old, rusty junk car sitting in your driveway, they might not be your first call to get it hauled away. For that, you'd typically look for dedicated junk car buyers or scrapyards that specialize in whole vehicle removal. They might accept parts of a car if you break it down into scrap metal, but they are not primarily in the business of towing away your old ride. If you're looking to sell your car online today for cash, other services might be a better fit.
Still, if you're curious, it never hurts to give them a ring at (603) 883-0093 to ask about their current policies regarding vehicles or large metal items.
Other Junkyards and Salvage Yards Near Interstate Metal & Alloy
Since Interstate Metal & Alloy is mostly about scrap metal recycling and not selling used car parts, it's good to know about other places nearby if you are actually looking for auto parts or to sell a whole junk car. The Nashua area has a few places that handle junk vehicles:
- Kelly’s Junkyards: Known for buying all kinds of vehicles, even if they don't run. They offer free towing and pay cash right on pickup, often without needing your title or keys.
- Wheelzy: An online-focused service that gives instant cash offers for most vehicles and aims for a quick pickup.
- Salisbury Auto Salvage: They serve the Nashua area and focus on eco-friendly recycling, paying top dollar for vehicles with free towing to their location.
- The Clunker Junker: Another service that buys vehicles in any condition, known for transparent pricing and being licensed and insured.
These places are more like your traditional wrecking yards or auto salvage yards that deal directly with buying and dismantling whole vehicles. They use big equipment like forklifts, cranes to move cars around, and sometimes even car crushers for compacting vehicles for recycling. So, if you're looking to get rid of a full car or find specific used parts, these would be the places to check out first!
Common Questions About Interstate Metal & Alloy
Here are some quick answers to questions folks often ask about Interstate Metal & Alloy:
-
What types of scrap metal do they take?
They take a lot! Think copper, brass, aluminum, steel, stainless steel, and nickel alloy. They’re big on plumbing, electrical, and HVAC scrap, and they also accept computer e-waste. -
Where are they and when are they open?
You can find them at 20 Simon Street, Nashua, NH 03060. Their main hours are Monday through Friday, 7:30 AM to 4:30 PM. -
Do they offer fair prices for scrap?
Yup! They're known for giving competitive prices based on current market values, and they pay quickly. No waiting around for your cash! -
What kinds of businesses use them?
Lots of pros like plumbers, electricians, HVAC contractors, machine shops, and fabricators use them regularly because they make recycling easy. -
Is it easy to drop off scrap?
Super easy! They have a clean, safe, indoor facility that makes dropping off your materials convenient, no matter the weather. -
What kind of equipment do scrap yards like this use?
They use heavy-duty stuff like industrial scales for accurate weighing, forklifts to move big piles of metal, cutting tools for breaking down large pieces, and sometimes balers or compactors to get everything ready for shipment. It’s all about efficiency! -
How can I get in touch with them?
You can call them at (603) 883-0093, fax them at (603) 883-0096, or send an email to [email protected].
No Records Found
Sorry, no records were found. Please adjust your search criteria and try again.
Google Map Not Loaded
Sorry, unable to load Google Maps API.
Comments are closed.