CMC Recycling In Columbia SC

About CMC Recycling in Columbia, SC: More Than Just a Scrap Yard

Located at 1148 Shop Rd, Columbia, SC 29201, CMC Recycling isn't your typical pick-your-own-parts junkyard. Instead, think of them as a massive metal recycling powerhouse. They've been a key player in the greater Columbia metropolitan area since the early 1970s, helping folks get rid of old metal and turn it into something new. It's a great example of how junkyards help reduce waste and boost the circular economy. The larger CMC company was founded way back in 1915 by Moses Feldman in Dallas, Texas, as a scrap metal processing facility. While the specific founders of the Columbia facility aren't named, their long history shows a serious commitment to recycling in the region.

For those of you looking for a traditional auto salvage yard to find that specific used part, CMC Recycling primarily focuses on processing scrap metals. So, if you're hoping to yank an engine or grab a door panel, this might not be your spot. But if you've got an old car or a pile of scrap metal you want to get rid of, these are your guys!

Services Provided at CMC Recycling Columbia

CMC Recycling on Shop Road is a top-notch metal recycling facility. They specialize in handling both ferrous (like iron and steel) and non-ferrous (like aluminum, copper, and brass) scrap metals. They work with everyone from big industrial businesses to small local shops and even individuals like you and me. Think of them as the go-to spot for getting rid of your metal junk responsibly.

What They Do Best: Metal Recycling & Scrap Management

• Full-Service Metal Recycling: They process pretty much any kind of scrap metal you can think of. Got an old lawnmower that's seen better days? Or maybe some leftover metal from a home project? Bring it on down!
• Scrap Management Services: For bigger jobs, they offer cool services like transportation and logistics (so you don't have to worry about hauling huge loads), mobile shearing and processing (they can cut down big pieces right there), on-site sorting, and even provide containers and roll-off services. Talk about making it easy!
• Mobile Automobile Crushing: While they don't sell used cars, they're experts at efficiently recycling vehicles by crushing them down to scrap. So, if you're looking to sell your car for scrap money, they can handle it.

Important Note for Auto Enthusiasts:

Unlike traditional junkyards or wrecking yards that sell used car parts, CMC Recycling is all about the metal. They do not sell used car parts. Their main goal is to recycle that metal so it can be made into new products, like fresh steel.

Quick Look at CMC Recycling's Services

Service Type	Description	Target Customer
Metal Recycling	Processes all types of ferrous and non-ferrous scrap metals.	Industrial, Small Businesses, Public
Scrap Management	Logistics, mobile processing, on-site sorting, container services.	Industrial, Small Businesses
Mobile Auto Crushing	Efficient recycling of whole vehicles for scrap metal.	Individuals, Businesses
No Used Car Sales	They do not sell used vehicles or parts.	N/A

What Kind of Vehicles Do They Accept for Recycling?

Since CMC Recycling is a scrap metal facility, they don't have an “inventory” of used cars for sale. Instead, they accept a wide range of vehicles that are ready to be turned into scrap metal. Think of them as the final stop for your old ride. They're all about that vehicle recycling life!

• Cars: Most makes and models, whether it's an old Toyota, a beat-up Ford, a trusty Honda, a classic Chevrolet, or a retired Nissan.
• Trucks: Various truck models, from workhorse Fords to tough Chevrolets and sturdy Rams.
• SUVs and Vans: Popular models from brands like Honda, Toyota, and Ford are typically accepted.
• Motorcycles: While not specifically highlighted, many scrap metal recycling facilities will take motorcycles too.

They accept vehicles of all ages, whether it's a newer model that's been totaled or an ancient ride from the last century. Just remember: if your vehicle is older than 12 model years, you'll need to bring the title of ownership or an affidavit of ownership. One important thing to note: they do not accept hybrid vehicles. So, if you're trying to scrap a Prius, you'll need to find another solution.

Popular Auto Parts (From Other Salvage Yards)

As we've mentioned, CMC Recycling is focused on metal processing, not selling individual used auto parts. So, you won't find a shelf full of alternators or a pile of bumpers here. However, if you're on the hunt for parts, the Columbia area has other great options for you to explore!

In general, when visiting a traditional salvage yard or wrecking yard, these are some of the hottest items folks are usually looking for:

• Engines and Transmissions: These are the big-ticket items, often saving you a ton of money compared to new ones. Learning if buying a used transmission is a good idea can save you some serious cash.
• Body Panels: Doors, hoods, trunks, and fenders are often damaged in accidents and need replacement. Finding OEM parts can be a real score.
• Electrical Components: Alternators, starters, and wiring harnesses are frequently needed.
• Wheels and Tires: A great way to get a matching set or a spare for a good price.
• Suspension and Steering Components: Parts like shocks, struts, and control arms wear out over time.
• Interior Components: Seats, dashboards, and trim pieces can make an old car feel new again.
• Exhaust Systems: Mufflers and catalytic converters often need replacing due to rust.

If you're looking for that perfect used auto part, consider checking out:

• Pull-A-Part on Monticello Road: This is a classic self-service junkyard where you can go in and pull your own parts. It's a great adventure for any gearhead!
• 221 Auto Parts & Recycling: They specialize in high-quality used and recycled OEM parts, which means you're getting genuine parts without the brand-new price tag.

Most Recent Auto Parts Prices

Since CMC Recycling focuses on metal recycling and doesn't sell individual auto parts, they don't have pricing for specific components. Their business is about giving you money for your scrap metal, not selling you a door handle.

For accurate and up-to-date pricing on used auto parts in the Columbia area, you'll want to contact establishments that specialize in parts sales. Consider reaching out to:

• Carolina Salvage: They are known for offering “super low prices” on parts. It's always smart to check their website or call directly for the latest deals.
• 221 Auto Parts & Recycling: They provide competitive pricing on their high-quality recycled OEM auto parts. Give them a call for current prices.

Remember, prices for used parts can change based on demand, rarity, and the condition of the part, so always confirm before you make the trip!

Service Area: Who CMC Recycling Serves

CMC Recycling on Shop Road is a big draw for folks living in Columbia, SC, and the whole surrounding metropolitan area. While their main spot is right there in the heart of Columbia, they pull in business from tons of nearby towns and cities within Richland, Lexington, and other neighboring counties. They're a pretty big deal as a major recycling and salvage facility!

People commonly travel from these nearby communities to offload their scrap metal or old vehicles:

• Cayce, SC
• West Columbia, SC
• Lexington, SC
• Irmo, SC
• Forest Acres, SC

Their reputation for being fair with their pricing and providing solid, reliable service makes them a top destination for individuals and businesses looking to get rid of scrap metal in central South Carolina. So, if you're around the area, chances are they're just a short drive away!

Interchange System: Not What You'll Find Here

If you're looking for an auto parts interchange system—that handy setup where you can figure out if a part from a 1998 Ford F-150 will fit your 2002 Ford Expedition—you won't find that at CMC Recycling on Shop Road. Why? Because, as we've talked about, their main gig is metals recycling, not selling individual car parts.

They're focused on getting that scrap metal processed, not helping you match up a new steering column. So, no computerized inventory system for specific parts, and no staff to help you figure out if that headlight from a different model will work for your ride.

For that kind of service, you'll need a traditional junkyard or used auto parts store. For example, Pull-A-Part at 5702 Monticello Rd, Columbia, SC, is a self-service auto parts salvage yard where you can often browse and find compatible parts. But for recycling your metal, CMC is the name of the game!

Warranty Information: It's All About Scrap Here

Since CMC Recycling at 1148 Shop Road primarily deals with processing scrap metal and doesn't sell individual used parts, there's no specific warranty information for parts from this location. You're not buying a used engine or a transmission here, so a warranty on those items isn't applicable.

However, it's good to know what to expect if you *do* buy used auto parts from other salvage yards. Many reputable used auto parts providers will offer some kind of warranty, often:

• Standard Warranties: Typically range from 90 days to six months. For instance, a place like Carolina Salvage might offer a 90-day limited warranty on most full-service parts. Another, like 221 Auto Parts & Recycling, might give you a six-month standard parts replacement warranty. This is super important if you're investing in a big part like a used transmission or engine.
• Extended Warranty Options: Some places might offer you the chance to buy extra protection, giving you peace of mind for longer. You'd typically need to chat with their sales team for these details.

The bottom line for CMC Recycling is: they take the metal, they don't sell the parts with a warranty. If you need details about selling your scrap or their services, give them a call directly. Their hours are Monday – Friday, 8:00 AM – 4:15 PM.

Entry Fee & How to Get Paid

Good news! There's no entry fee or cover charge to bring your scrap metal to CMC Recycling in Columbia, SC. You won't have to shell out any extra money just to drop off your old stuff.

What You Need to Know for Your Visit:

• ID is a Must: You'll need a valid state-issued ID for all transactions. No sneaking in with a fake mustache!
• Permit for Certain Metals: If you're recycling certain non-ferrous metals (like copper, AC radiators, or catalytic converters), you'll need a scrap permit from the County Sheriff's Department. Don't worry, it's usually free and good for two years. This is part of the law in South Carolina.
• How You Get Your Cash: For most transactions, especially for selling vehicles for scrap, payments are typically made by voucher. You can redeem these onsite at their ATM for amounts up to $1,000. For bigger hauls (over $1,000), you'll usually get a check. Just a heads up, South Carolina law stops them from giving out actual cash for certain regulated metals.

Quick Reference: Entry & Payment

Feature	Details
Entry Fee	None to bring in scrap metal.
ID Requirement	Mandatory state-issued ID for all customers.
Permit Required	For non-ferrous metals (like copper), obtain a scrap permit from the Sheriff’s Department.
Payment Method	Voucher (up to $1,000 via ATM) or Check (over $1,000). No cash for regulated metals per state law.

So, whether you're bringing in a small load or scrapping an old car, you're set for an easy process!

Tools and Equipment Needed to Pull Used Auto Parts (For Other Yards)

Alright, let's clear something up right away: at CMC Recycling, you won't be needing your wrench set to pull parts. They are a scrap metal recycling facility, not a self-service junkyard where you wander around with your toolbox. They're handling the heavy lifting of crushing and processing vehicles for their metal content.

However, if you're planning a trip to a traditional U-Pull-It yard (like Pull-A-Part, mentioned earlier), then you'll definitely need to be prepared! Knowing what to bring to a junkyard can make all the difference. Here’s a basic list of tools that will save your bacon (and your back):

• Basic Hand Tools: Think sockets, wrenches (open-end and box-end), screwdrivers (flathead and Phillips), and pliers. These are your bread and butter for most jobs.
• Pry Bars: Sometimes parts are just plain stuck. A good pry bar is your friend.
• Cutting Tools: For rusty bolts or stubborn parts, a small angle grinder or a reciprocating saw (with extra blades!) can be a lifesaver. Just make sure the yard allows power tools and always prioritize safety tips for junkyard visits.
• Lifting Gear: A sturdy jack and jack stands are essential if you need to get under a vehicle safely.
• Safety Gear: Don't be a hero! Always wear work gloves, safety glasses, and sturdy, closed-toe shoes. Trust us, your eyes and feet will thank you.
• Specialized Automotive Tools: Depending on the part (e.g., spark plug sockets, brake caliper tools), you might need something specific.

CMC Recycling's staff will be operating heavy machinery like forklifts to move vehicles, but they won't be handing you a wrench. Always call ahead to any wrecking yard to confirm their specific rules on tools and safety before you go!

Cash for Junk Cars: What to Expect at CMC Recycling

If you're thinking, “I need to sell my car for some quick cash,” CMC Recycling is definitely a place that buys vehicles for scrap. However, there's a key thing to understand about how they pay, thanks to South Carolina law.

Getting Paid for Your Junk Car: Not Always Cash

• Voucher or Check: Due to state regulations on certain “regulated metals” (like copper, AC radiators, and catalytic converters), CMC typically pays by voucher. You can usually redeem this voucher at an onsite ATM for amounts up to $1,000. For bigger amounts, you'll get a check. So, don't expect a stack of bills for your whole junk car!
• What About My Old Tools? If you're wondering if they buy metal tools (like old wrenches or hammers), yes, they'll take them for their scrap metal content. But they don't buy used tools for resale; it's strictly for the metal. Just make sure they aren't prohibited items like electronics or hazardous materials.

Will They Buy Any Vehicle in Any Condition?

For the most part, CMC Recycling will consider buying vehicles for scrap, even if they're a total wreck. They're mainly interested in the metal content. But there are a few rules:

• Proof of Ownership: You absolutely need the vehicle's title of ownership. If your vehicle is older than 12 model years, an affidavit of ownership might be accepted instead. Don't forget your paperwork!
• Condition: While they accept cars in various conditions, they won't take vehicles with hazardous materials or unidentifiable junk inside. And a big one to remember: hybrid vehicles are explicitly NOT accepted. So if your hybrid battery is giving you headaches, CMC isn't the spot for it.
• Missing Parts: Vehicles with missing parts might still be acceptable for scrap. Just know that the value you get will depend on the overall metal content.

It's always a smart move to call the Columbia CMC Recycling location directly for the most up-to-date info and to get a free quote for your specific vehicle. They can tell you exactly what they're looking for and how much money you can expect.

News and Notable Information About CMC Recycling

While we couldn't dig up any specific recent news headlines about the CMC Recycling location at 1148 Shop Rd, Columbia, SC 29201, there's plenty of cool stuff to know about their operations and impact. They're not just another scrap yard; they're a significant player in the automotive industry's recycling efforts.

A True Recycling Powerhouse

CMC Recycling is a major force in processing both ferrous and non-ferrous scrap metals. They literally transform discarded metal into new steel products using some seriously advanced recycling technology. Talk about turning trash into treasure!

Just imagine: this company recycles over 17 billion pounds of metal annually! That's a staggering amount, showing how much they contribute to sustainability and resource conservation. They keep tons of metal out of landfills, helping our planet breathe a little easier. This is a prime example of how modern junkyards and salvage yards play a vital role in our environment.

Serving Everyone, Efficiently

They serve everyone from big industrial customers to small businesses and even individual folks with a load of scrap. Their focus is always on:

• Competitive Pricing: Getting you the best possible price for your metal.
• Accurate Weighing: No funny business; you get paid for what you bring.
• Efficient Service: They want to get you in and out quickly, like a well-oiled machine.
• Timely Payments: Getting your money to you without a long wait.

So, while they might not be making headlines every day for selling a rare engine, their quiet dedication to recycling billions of pounds of metal makes them a true unsung hero of the economy and the environment. You can learn more about their broader efforts at the main CMC Recycling website.

Other Junkyards and Salvage Yards in Columbia, SC

While CMC Recycling is your go-to for offloading scrap metal, if you're on the hunt for a specific used auto part or a cheap used car, you'll want to check out some of the other spots around Columbia. There are other fantastic salvage yards in South Carolina that cater to different needs.

Nearby Options for Used Auto Parts:

• Pull-A-Part Columbia: This is a popular self-service junkyard where you literally “pull” your own parts. It’s a great way to save a buck and get your hands dirty finding that perfect part for your car or truck. It’s an adventure finding the part you need!
• 221 Auto Parts & Recycling: Specializes in high-quality used and recycled OEM parts. If you're not into pulling parts yourself, these guys might have just what you need already off the vehicle and ready to go.
• Bull Dog Junking: Another local option in Columbia, providing services similar to traditional junkyards. You can contact them at +1 803-873-4445.
• Omnisource Southeast & Carolinas Recycling Group: Interestingly, these facilities are also listed at 1148 Shop Rd, the same address as CMC Recycling. This suggests they might be related businesses, operating under different names, or sharing facilities, focusing on similar scrap metal and recycling services. So, while they might not be selling parts, they're part of the same metal-moving ecosystem.

Each of these places has its own specialty. If you're looking for that specific transmission or a hard-to-find wheel, calling ahead or visiting their respective websites is always a good idea to check their inventory.

Common Questions About CMC Recycling Columbia

Got more questions? We've got answers! Here are some common queries folks have about CMC Recycling and what you can expect when dealing with a top-tier metal recycler like them.

1. What types of metal does CMC Recycling in Columbia, SC accept?

CMC Recycling is your spot for all sorts of ferrous (like steel and iron from old cars, appliances) and non-ferrous metals (such as aluminum, copper, and brass). They'll take things like old appliances, vehicles (for scrap), and construction metal scraps. Just a heads up: some metals, especially copper, AC radiators, and catalytic converters, are regulated by South Carolina law and require special permits or documentation. Always call ahead if you're unsure!

2. What do I need to bring when selling scrap metal at CMC Recycling (ID, permit, tools, etc.)?

You'll need a valid state-issued ID – no exceptions! For those regulated non-ferrous metals, grab a free recycler's permit from the County Sheriff's Department (it's good for two years). If you're scrapping an entire vehicle, bring the title of ownership. For cars older than 12 model years, an affidavit might work instead. As for tools, you won't need them to “pull parts” here, but if you're breaking down a large item at home before you bring it, use your own hammers, wrenches, or saws.

3. How does payment work at CMC Recycling in Columbia?

Payments are typically made via a voucher. You can redeem this voucher at the facility's onsite ATM for amounts up to $1,000. For larger transactions, you'll get a check. Remember, South Carolina law prevents them from giving out cash for certain regulated metals. It’s all about staying legal and transparent!

4. What items or materials does CMC Recycling not accept?

They can't take everything. Avoid bringing hazardous waste (like asbestos), PCB/transformers/capacitors, CFCs, sealed containers, liquids, flammable materials, trash, concrete, or anything with strong odors. They also specifically do not accept hybrid vehicles, most office/electronic equipment, or unidentifiable junk. Basically, if it's not metal or a vehicle purely for scrap, it might not be accepted.

5. Are there any fees or requirements for recycling large appliances or vehicles?

No fees for bringing in large appliances or vehicles for scrap! Just make sure you have proof of ownership (like a title or affidavit) for vehicles. For large appliances, you can generally bring them directly to CMC for recycling. They're all about making it easy to recycle responsibly.

6. What tools should I bring to a junkyard like CMC Recycling if I need to remove parts or scrap a car?

Again, for CMC Recycling specifically, you don't need tools to remove parts as they are a scrap metal processor. However, for a traditional pull-your-own-parts junkyard, you'd want:

• Basic hand tools: Wrenches, sockets, screwdrivers, pliers.
• Cutting tools: Bolt cutters, reciprocating saw.
• Lifting equipment: Jack and jack stands (always use safely!).
• Safety gear: Gloves, safety glasses, sturdy shoes.

Always double-check with any salvage yard about their specific tool policies before you visit. Better safe than sorry!

7. How do I find out if my item is accepted at CMC Recycling or what are the specific local rules?

The best way is to contact CMC Recycling directly at 1148 Shop Rd, Columbia, SC 29201, or visit their official website. For questions about regulated metals, permits, or specific items, a quick phone call is always recommended. For broader recycling info in South Carolina, you can also check out the state's Department of Health and Environmental Control.